What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 30.06.2025 03:41
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
A circuit breaker is similar, but is resettable.
Apple’s Liquid Glass design is paving the way for AR glasses - TechCrunch
the problem then depends on "how fast does the fuse operate?".
It also is a device that limits the change in current flow.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
First Sentence:
The other is “what does a “fuse” do?”
(Dc diagram shown, AC is similar).
Researchers claim spoof-proof random number generator breakthrough - theregister.com
what exactly is a ‘surge’ protector?
I post the exact comment here.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Now when you have a certain ac resistance, then a current flows in a loop.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
NASA’s Hurricane Science, Tech, Data Help American Communities - NASA Science (.gov)
This one hit behind the barn.
One is “what exactly is in a ‘surge protector’ ? ”
There are three different concepts here that are getting confused.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
In schematic diagrams this is the symbol for a fuse:
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
Why do Democrats never produce a good argument for why Trump was a bad president?
One
Here is a simplified AC power diagram.
The bolt then partially travels down the line to your home.
FX’s ‘Alien: Earth’ Official Trailer Reveals a Predatory Twist - The Hollywood Reporter
but this device (an Inductor) … impedes the rapid changes in the current.
An AC voltage/ current source, and an ac inductive load.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
[old diagram got deleted by accident]
Upvotes:
2024–10–14 [Omar Gharbi Omar Gharbi ]
Eveniet dolor unde ut ut praesentium ut aperiam.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
This device then solves the entire problem.
a photo is worth a thousand words.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
There are two important concepts here.
The third is lightning and “how it gets conducted into a home.”
Edit 2024–10.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
2024–10–10[John johnson John Johnson ]
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
This is 'the assistant's answer'
What is lightning?
These are simplified answers to the original question, and does not change anything I wrote above.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
What does a fuse do?
At least they know the answer if they wanted it.
But it can get overloaded, and no longer works.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
He then asserts :
This is the picture of an electronic coil of wire wound around a core of magnetic material.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
[image of Common-mode choke]
2024–10–16 [ OO OLAOYE OYEBODE ]
The MOV will conduct when the voltage exceeds 50% of line voltage.
Because the load is inductive, the current lags the voltage.(by a bit).
nine
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
A fuse is a non-resetable over current circuit protector.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
It seems Mohan does not understand the difference between a comment and an Answer.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
so, what happens?
This is where this question deviates from being a 'generic' question, and becomes more specific.
He then describes Rainy Season and Lightning.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
At one ohm, the resistor has a maximum of 1 watt power.
but I think this circuit , shows a few more pieces.
eight
These devices are installed between the “hot” and “neutral” and protective ground.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
But… the neutral is now “floating” because of the 1 ohm resistance.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Barnstars:
So, the voltage could go up to 500 volts, and the fuse will not open up.
He then describes the function of a fuse.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
This is where the MOV conducts again, and dissipated the energy.
For this case there are devices called Metal oxide varistors (MOV).
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi